PM1000X5

Punch Marine 1,000 Watt Class-bd 5-Channel Amplifier

The PM1000X5 is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications.

OVERVIEW

TECHNOLOGIES

SPECIFICATIONS

SUPPORT

ACCESSORIES

The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

 

  • High level input capable with Auto Turn-On circuit
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Infrasonic filter
  • 2/4 channel input switch
  • Marine grade two part epoxy coating on circuit boards
  • Marine grade stainless steel hardware

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

C.L.E.A.N. Set-Up

Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Class BD

Class-bd amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers.

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

CEA-2006 Compliant

Number of Channels

Total Power

(Sum of Rated Power)

Rated Power

(RMS Continuous Power)

Dynamic Power

(PVC/PowerCube®)

Bridgeable

Frequency Response

Input Sensitivity

Circuit Topology Class

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

Signal Input

Signal Output

Tone Controls

Crossover Controls

CEA-2006 Power Rating

75Wx4 + 150Wx1 @ 4Ω

≤1.0% THD+N

5

1000 Watts

75 Watts x 4 +

150 Watts x 1 @ 4-Ohm

 

125 Watts x 4 +

300 Watts x 1 @ 2-Ohm

 

N/A +

500 Watts @ 1-Ohm

115 Watts x 4 +

299 Watts x 1 @ 4-Ohms

 

190 Watts x 4 +

540 Watts x 1 @ 2-Ohms

 

N/A +

863 Watts x 1 @ 1-Ohm

Yes (front/rear channels)

Front/Rear: 20Hz - 20kHz +/-3dB

Sub: 20Hz - 500Hz +/-3dB

150 mV - 12 V

Class A/B + Class BD (Sub)

Front/Rear: 66% @ 4-Ohm

Sub Channel: 80% @ 4-Ohm

<1.0%

Input Switch: Hi/Low level input

Input Switch: 2/4 channel input

Hi/Low Level: 3 RCA Pair

Sub: front/sub input switch

N/A

Sub:

0dB to +18dB @ 45Hz

Front High-Pass:

50Hz - 250Hz  @ 12dB/Octave

Rear High-Pass:

50Hz - 250Hz @ 12dB/Octave

Sub Low-Pass:

50Hz - 250Hz

Sub infrasonic filter:

 28Hz @ 12dB/Octave

Remote Controls

Visual Indicators

Power Wire Gauge

Power Input Connector

Speaker Wire Gauge

Speaker Output Connector

Cooling

Heatsink

Operating Voltage

Recommended Fuse

(not included)

Average Current Draw

(13.8V Music)

Dimensions (H x W x D)

Shipping Weight

Optional Punch Level Control (PLC2) Ready

Power/Protect/Thermal LED

Input Clip LED3

Output Clip LED1,2,3

 

LED Color Legend:

1BLUE: <0.5% THD

2VIOLET: 1% THD

3RED: 10%+ THD

4 AWG

Block

12 AWG

Block

Convection

Cast aluminum

9 - 16 VDC

150 A

75 A

6,05 x 19,71 x 38,18 cm

6,93 kg

Knowledge Base Articles

 

Owner's manual:

English

Français

Italiano

Español

Deutsch

PLC2

Level Remote Controller
For every PUNCH & POWER amplifier