PM300X2
Punch Marine 300 Watt 2-Channel Amplifier
The PM300X2 is a 300 Watt 2-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
OVERVIEW
TECHNOLOGIES
SPECIFICATIONS
SUPPORT
ACCESSORIES
The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
C.L.E.A.N. Set-Up
Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
CEA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
Element Ready™ - Amps
These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
DTM
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
TRANS•ana
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
NOMAD
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
CEA-2006 Compliant
Number of Channels
Total Power
(Sum of Rated Power)
Rated Power
(RMS Continuous Power)
Dynamic Power
(PVC/PowerCube®)
Bridgeable
Frequency Response
Input Sensitivity
Circuit Topology Class
Efficiency (average)
Total Harmonic Distortion (THD+Noise)
Signal Input
Signal Output
Tone Controls
Crossover Controls
CEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N
2
300 Watts
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
120 Watts x 2 @ 4-Ohms
203 Watts x 2 @ 2-Ohms
Yes
20Hz to 20kHz +/- 1.0dB
150 mV - 12 V
Class A/B
69% @ 4-Ohm
4-Ohm: <1.0%
2-Ohm: <1.0%
Hi/Low level: 1 RCA pair
Low level: 1 RCA pair
0dB to +14dB @ 12.5kHz
0dB to +18dB @ 45Hz
High-Pass:
50Hz - 250Hz @ 12dB/Octave Butterworth
Low-Pass:
50Hz - 250Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
Visual Indicators
Power Wire Gauge
Power Input Connector
Speaker Wire Gauge
Speaker Output Connector
Cooling
Heatsink
Operating Voltage
Recommended Fuse
(not included)
Average Current Draw
(13.8V Music)
Dimensions (H x W x D)
Shipping Weight
Optional Punch Level Control (PLC2) Ready
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
8 AWG to 4 AWG
Captive C-Clamp
8 AWG to 18 AWG
Captive C-Clamp
Convection
Cast aluminum
9 - 16 VDC
50 A
23 A
6,05 x 19,71 x 25,04 cm
4,3 kg
PLC2
Level Remote Controller
For every PUNCH & POWER amplifier
