PM600X4

Punch Marine 600 Watt 4-Channel Amplifier

The PM600X4 is a 600 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

OVERVIEW

TECHNOLOGIES

SPECIFICATIONS

SUPPORT

The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

 

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Marine grade two part epoxy coating on circuit boards
  • Marine grade stainless steel hardware

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

C.L.E.A.N. Set-Up

Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

CEA-2006 Compliant

Number of Channels

Total Power

(Sum of Rated Power)

Rated Power

(RMS Continuous Power)

Dynamic Power

(PVC/PowerCube®)

Bridgeable

Frequency Response

Input Sensitivity

Circuit Topology Class

Efficiency (average)

Total Harmonic Distortion (THD+Noise)

Signal Input

Signal Output

Tone Controls

Crossover Controls

CEA-2006 Power Rating

75W x 4 @ 4Ω

≤1.0% THD+N

4

600 Watts

75 Watts x 4 @ 4-Ohm

150 Watts x 4 @ 2-Ohm

300 Watts x 2 @ 4-Ohm Bridged

129 Watts x 4 @ 4-Ohms

211 Watts x 4 @ 2-Ohms

Yes

20Hz to 20kHz +/- 1.0dB

150 mV - 12 V

Class A/B

68% @ 4-Ohm

4-Ohm: <1.0%

2-Ohm: <1.0%

Hi/Low level: 2 RCA pair

Low level: 1 RCA pair

Front Punch EQ2 Bass:

0dB to +18dB @ 45Hz and/or

Front Punch EQ2 Treble:

0dB to +12.5dB @ 12kHz

Rear Punch EQ2 Bass:

0dB to +18dB @ 45Hz and/or

Rear Punch EQ2 Treble:

0dB to +12.5dB @ 12kHz

Function depends upon

LP/AP/HP switch position

Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth

Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth

All-Pass: Yes

Remote Controls

Visual Indicators

Power Wire Gauge

Power Input Connector

Speaker Wire Gauge

Speaker Output Connector

Cooling

Heatsink

Operating Voltage

Recommended Fuse

(not included)

Average Current Draw

(13.8V Music)

Dimensions (H x W x D)

Shipping Weight

N/A

 

Power/Protect/Thermal LED

Input Clip LED3

Output Clip LED1,2,3

 

LED Color Legend:

1BLUE: <0.5% THD

2VIOLET: 1% THD

3RED: 10%+ THD

4 AWG

Captive C-Clamp

8 AWG to 18 AWG

Captive C-Clamp

Convection

Cast aluminum

9 - 16 VDC

100 A

45 A

6,05 x 19,71 x 33,73 cm

5,8 kg

Knowledge Base Articles

 

Owner's manual:

English

Français

Italiano

Español

Deutsch